Android Client 5.5

additional Client information

Re: Android Client 5.5

Unread postby skopo » 16 Jan 2014, 18:18

But if your router has no NAT-loopback that won't work either.

(this is answer for gurutech because i live in future)
skopo
Contributor
Contributor
 
Posts: 69
Joined: 07 Apr 2013, 07:48
Has thanked: 11 times
Been thanked: 20 times

Re: Android Client 5.5

Unread postby gurutech » 16 Jan 2014, 18:23

Set yourself up with a no-ip.com address, or a DynDNS address (I think DynDNS charges, but no-ip is free), and use that as your server address instead of the *.subsonic.org address on your mobile device.
gurutech
Contributor
Contributor
 
Posts: 324
Joined: 02 Jan 2013, 04:56
Has thanked: 12 times
Been thanked: 130 times

Re: Android Client 5.5

Unread postby gurutech » 17 Jan 2014, 03:26

NAT loopback is different than DNS forwarding and port forwarding.

There's an issue with the DNS servers that Subsonic uses for the *.subsonic.org domain forwarders; the only fix would affect all of the other clients that the DNS provider has (assuming the subsonic.org domain is not their only client), so that is why they aren't fixing it.

The workaround I have found is just to go with no-ip.com or DynDNS.
gurutech
Contributor
Contributor
 
Posts: 324
Joined: 02 Jan 2013, 04:56
Has thanked: 12 times
Been thanked: 130 times

Re: Android Client 5.5

Unread postby skopo » 17 Jan 2014, 09:04

I had two routers that didn't had nat-loopback support (or it was broken)
I use dyndns for connecting my phone to server.

With previuos routers xxxx.dyndns.org address didn't work in Lan-side. Had to use direct ip to server.
From 3G dyndns worked.

I have subsonic premium with registered xxxx.subsonic.org address it works from both.

With previous routers my dyndns-adress sent unknown reply...
skopo
Contributor
Contributor
 
Posts: 69
Joined: 07 Apr 2013, 07:48
Has thanked: 11 times
Been thanked: 20 times

Re: Android Client 5.5

Unread postby kenm1chaud » 22 Jan 2014, 19:30

If you can manually edit your router's DNS settings then you can make this work. And you can even on a simple FIOS MI-424wr router.

If you have DynDNS - let's say you're using a free version of noip, and your address is myaddress.hopto.org. Add a manual entry in your router's DNS table that points myaddress.hopto.org to your madsonic server's internal IP. When you're on the LAN, voila - your router sends you directly to the server, no need for NAT loopback. And when you're outside the LAN, your phone uses public DNS servers and is sent to your server's WAN IP.
kenm1chaud
 
Posts: 1
Joined: 30 Nov 2013, 05:46
Has thanked: 0 time
Been thanked: 0 time

Re: Android Client 5.5

Unread postby skopo » 22 Jan 2014, 21:38

I was using Ciscos cable-modem-router back then and there was no option to make any routing tables expect port forwarding.

In LAN -> myaddress.dyndns.org:4040 -> not found
skopo
Contributor
Contributor
 
Posts: 69
Joined: 07 Apr 2013, 07:48
Has thanked: 11 times
Been thanked: 20 times

Re: Android Client 5.5

Unread postby xternal » 24 Jan 2014, 04:56

Madsonic taken down from play store?
xternal
 
Posts: 8
Joined: 31 Aug 2013, 02:17
Has thanked: 1 time
Been thanked: 2 times

Re: Android Client 5.5

Unread postby SerpensAlatus » 28 Jan 2014, 12:36

Great...

reinstalled my Phone today. The Madsonic Client isnt in the Play-Store anymore.

What happened???

I like to use the Software i paid for. ;)

Regards
Volker
SerpensAlatus
 
Posts: 9
Joined: 08 Feb 2013, 11:31
Has thanked: 0 time
Been thanked: 2 times

Re: Android Client 5.5

Unread postby msndebord » 31 Jan 2014, 06:38

SerpensAlatus wrote:Great...

reinstalled my Phone today. The Madsonic Client isnt in the Play-Store anymore.

What happened???

I like to use the Software i paid for. ;)

Regards
Volker


It's back up!
msndebord
 
Posts: 2
Joined: 07 Jun 2013, 04:16
Has thanked: 0 time
Been thanked: 0 time

Re: Android Client 5.5

Unread postby sling » 05 Feb 2014, 17:32

why is 5.5 not beeing pushed on google play ? i have developed a compulsive disorder checking for the update !
sling
 
Posts: 1
Joined: 25 Aug 2013, 17:28
Has thanked: 1 time
Been thanked: 0 time

Re: Android Client 5.5

Unread postby apastuszak » 14 Mar 2014, 16:55

Are there any plans to add the ability browse your library by ID3 tags, the way DSub and Ultrasonic can?
apastuszak
 
Posts: 18
Joined: 30 Oct 2013, 03:51
Has thanked: 1 time
Been thanked: 7 times

Re: Android Client 5.5

Unread postby etyrnal » 20 May 2014, 21:34

Client/server not showing newly added songs..

meaning:

on server a drop a few new MP3s into one of the music directories. Then, in the middle of the night Madsonic server is set to rescan every night... so next day, on android client, i select New Added, and i do NOT see the newly added tracks.

What's the problem??

What's the point of New Added if it's showing me some very old stuff, and NOT showing the new files i added??
etyrnal
 
Posts: 62
Joined: 04 Nov 2013, 05:56
Has thanked: 35 times
Been thanked: 10 times

Previous

Return to Info

Who is online

Users browsing this forum: No registered users and 1 guest

cron